View 1206SXXX_82900.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

High Voltage MLC Chips
For 600V to 5000V Application
High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chips capacitors meet these performance characteristics and are designed for applications such as snubbers in high frequency power converters, resonators in SMPS, and high voltage coupling/DC blocking. These high voltage chip designs exhibit low ESRs at high frequencies. Larger physical sizes than normally encountered chips are used to make high voltage chips. These larger sizes require that special precautions be taken in applying these chips in surface mount assemblies. This is due to differences in the coefficient of thermal expansion (CTE) between the substrate materials and chip capacitors. Apply heat at less than 4C per second during the preheat. Maximum preheat temperature must be within 50C of the soldering temperature. The solder temperature should not exceed 230C. Chips 1808 and larger to use reflow soldering only. Capacitors with X7R Dielectrics are not intended for AC line filtering applications. Contact plant for recommendations. Capacitors may require protective surface coating to prevent external arcing.
HOW TO ORDER
1808
AVX Style 1206 1210 1808 1812 1825 2220 2225 3640
A
A
271
K
A
1
Termination* 1 = Pd/Ag T = NiGuard Nickel Barrier Solder Plate
1A
Packaging/Marking** ME = 7" Reel Marked RE = 13" Reel Marked BE = Bulk/Marked 1A = 7" Reel Unmarked 3A = 13" Reel Unmarked 9A = Bulk/Unmarked
Voltage Temperature Capacitance Code 600V = C Coefficient (2 significant digits 1000V = A C0G = A + no. of zeros) 1500V = S X7R = C Examples: 2000V = G 10 pF = 100 2500V = W 100 pF = 101 3000V = H 1,000 pF = 102 4000V = J 22,000 pF = 223 5000V = K 220,000 pF = 224 1 F = 105
Capacitance Failure Tolerance Rate C0G: J = 5% A = Not K = 10% Applicable M = 20% X7R: K = 10% M = 20% Z = +80%, -20%
*Note: Leaded terminations are available. Styles 1825, 2225, & 3640 are available with "N", "L" or "J" leads as seen on page 9. "V" denotes uncoated leaded units similar to SM0 product. "W" denotes leaded epoxy coated units similar to SM5 product. IE 1825AA103KAV00J would be uncoated leaded part with "J" style leads. **Note: Style 1808 cannot have the marking oriented in tape & reel packaging due to square cross-section of chip. Unmarked product is standard.
W L
T
DIMENSIONS
SIZE (L) Length (W) Width (T) Thickness Max. (t) terminal 1206 1210 1808*
t
1812* 1825* 2220*
millimeters (inches)
2225* 3640*
min. max.
3.20 0.2 3.20 0.2 4.57 0.25 4.50 0.3 4.50 0.3 5.7 0.4 5.72 0.25 9.14 0.25 (0.126 0.008) (0.126 0.008) (0.180 0.010) (0.177 0.012) (0.177 0.012) (0.224 0.016) (0.225 0.010) (0.360 0.010) 1.60 0.2 2.50 0.2 2.03 0.25 3.20 0.2 6.40 0.3 5.0 0.4 6.35 0.25 10.2 0.25 (0.063 0.008) (0.098 0.008) (0.080 0.010) (0.126 0.008) (0.252 0.012) (0.197 0.016) (0.250 0.010) (0.400 0.010) 1.52 1.70 2.03 2.54 2.54 3.3 2.54 2.54 (0.060) (0.067) (0.080) (0.100) (0.100) (0.130) (0.100) (0.100) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.76 (0.030) 0.75 (0.030) 0.75 (0.030) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.52 (0.060)
*Reflow Soldering Only
42
High Voltage MLC Chips
For 600V to 5000V Applications C0G Dielectric
Performance Characteristics
Capacitance Range Capacitance Tolerances Dissipation Factor Operating Temperature Range Temperature Characteristic Voltage Ratings Insulation Resistance (+25C, at 500 VDC) Insulation Resistance (+125C, at 500 VDC) Dielectric Strength 10 pF to 0.047 F (25C, 1.0 0.2 Vrms at 1kHz, for 1000 pF use 1 MHz) 5%, 10%, 20% 0.1% max. (+25C, 1.0 0.2 Vrms, 1kHz, for 1000 pF use 1 MHz) -55C to +125C 0 30 ppm/C (0 VDC) 600, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 VDC (+125C) 100K M min. or 1000 M - F min., whichever is less 10K M min. or 100 M - F min., whichever is less 120% rated voltage for 5 seconds at 50 mA max. current
HIGH VOLTAGE C0G CAPACITANCE VALUES
VOLTAGE
600 1000 1500 2000 2500 3000 4000 5000 min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.
1206
100 pF 680 pF 10 pF 470 pF 10 pF 150 pF 10 pF 68 pF -- -- -- -- -- -- -- --
1210
100 pF 1500 pF 100 pF 820 pF 100 pF 330 pF 10 pF 150 pF -- -- -- -- -- -- -- --
1808
100 pF 2700 pF 100 pF 1500 pF 10 pF 470 pF 10 pF 270 pF 10 pF 150 pF 10 pF 100 pF 10 pF 39 pF -- --
1812
100 pF 5600 pF 100 pF 2700 pF 10 pF 1000 pF 10 pF 680 pF 10 pF 390 pF 10 pF 330 pF 10 pF 100 pF -- --
1825
1000 pF 0.012 F 100 pF 6800 pF 100 pF 2700 pF 100 pF 1800 pF 10 pF 1000 pF 10 pF 680 pF 10 pF 220 pF -- --
2220
1000 pF 0.012 F 1000 pF 0.010 F 1000 pF 2700 pF 1000 pF 2200 pF 100 pF 1000 pF 10 pF 680 pF 10 pF 220 pF -- --
2225
1000 pF 0.015 F 1000 pF 0.010 F 1000 pF 3300 pF 1000 pF 2200 pF 100 pF 1200 pF 10 pF 820 pF 10 pF 330 pF -- --
3640
1000 pF 0.047 F 1000 pF 0.018 F 100 pF 8200 pF 100 pF 5600 pF 100 pF 3900 pF 100 pF 2200 pF 100 pF 1000 pF 10 pF 680 pF
X7R Dielectric
Performance Characteristics
Capacitance Range Capacitance Tolerances Dissipation Factor Operating Temperature Range Temperature Characteristic Voltage Ratings Insulation Resistance (+25C, at 500 VDC) Insulation Resistance (+125C, at 500 VDC) Dielectric Strength 10 pF to 0.56 F (25C, 1.0 0.2 Vrms at 1kHz) 10%; 20%; +80%, -20% 2.5% max. (+25C, 1.0 0.2 Vrms, 1kHz) -55C to +125C 15% (0 VDC) 600, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 VDC (+125C) 100K M min. or 1000 M - F min., whichever is less 10K M min. or 100 M - F min., whichever is less 120% rated voltage for 5 seconds at 50 mA max. current
HIGH VOLTAGE X7R MAXIMUM CAPACITANCE VALUES
VOLTAGE
600 1000 1500 2000 2500 3000 4000 5000 min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.
1206
1000 pF 0.015 F 1000 pF 4700 pF 100 pF 1200 pF 10 pF 470 pF -- -- -- -- -- -- -- --
1210
1000 pF 0.027 F 1000 pF 0.010 F 100 pF 2700 pF 100 pF 1000 pF -- -- -- -- -- -- -- --
1808
.01 F 0.033 F 1000 pF 0.015 F 100 pF 3900 pF 100 pF 1800 pF 10 pF 1200 pF 10 pF 560 pF -- -- -- --
1812
.01 F 0.068 F 1000 pF 0.027 F 100 pF 8200 pF 100 pF 4700 pF 10 pF 2200 pF 10 pF 1200 pF -- -- -- --
1825
.01 F 0.15 F 1000 pF 0.068 F 1000 pF 0.018 F 100 pF 8200 pF 100 pF 5600 pF 100 pF 2700 pF -- -- -- --
2220
.01 F 0.15 F .01 F 0.068 F 1000 pF 0.022 F 1000 pF 0.010 F 1000 pF 6800 pF 1000 pF 3300pF -- -- -- --
2225
.01 F 0.22 F .01 F 0.082 F 1000 pF 0.027 F 1000 pF 0.012 F 1000 pF 8200 pF 1000 pF 4700 pF -- -- -- --
3640
.01 F 0.56 F .01 F 0.22 F .01 F 0.068 F 1000 pF 0.027 F 1000 pF 0.022 F 1000 pF 0.018 F 100 pF 6800 pF 100 pF 3300 pF
43
High Voltage MLC Chips
Packaging of Chip Components
AUTOMATIC INSERTION PACKAGING TAPE & REEL QUANTITIES
All tape and reel specifications are in compliance with EIA481 & IEC-286-3.
8mm 1206 1210 Qty. per Reel/7" Reel Qty. per Reel/13" Reel 2000 10,000 1808 2000 4000 12mm 1812, 1825 2220, 2225 1000 4000 24mm 3640 N/A 1000
REEL DIMENSIONS
DIMENSIONS
Tape Size 8mm A Max. 330 (12.992) B* Min. 1.5 (0.059) C D* Min. 20.2 (0.795) N Min. 50 (1.969) 8.4 W1 +1.5 -0.0 (0.331 +.060) -0.0 +2.0 12.4 -0.0 (0.488 +.079) -0.0 +2.0 24.4 -0.0 (0.961 +.079) -0.0
millimeters (inches) W2 Max. 14.4 (0.567) W3 7.9 Min. (0.311) 10.9 Max. (0.429) 11.9 Min. (0.469) 15.4 Max. (0.607) 23.9 Min. (0.941) 27.4 Max. (1.079)
13.00.20 (0.5120.008)
12mm
330 (12.992)
1.5 (0.059)
13.00.20 (0.5120.008) +0.5 13.0 -0.2 +.020) -.008
20.2 (0.795)
50 (1.969)
18.4 (0.724)
1.5 Metric dimensions will 360 govern. 24mm (14.173) (0.059) English measurements rounded and for reference only. (0.512
20.2 (0.795)
60 (2.362)
30.4 (1.197)
44

▲Up To Search▲

Price & Availability of 1206SXXX

	To Download 1206SXXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .